8.702-913.0 Replacement - Valve Kit with Valve and Cap O-Rings (6-Valve)

High PSI Products replacement for 8.702-913.0

Replacement for the 8.702-913.0 valve kit (87029130): a complete valve kit for the EZ, TP and TX Series and the TS2012SS, TS2016SS and TS2221SS triplex pumps fitted to Hotsy, Landa and Legacy pressure washers - 6 assembled inlet and discharge valves, each with its valve O-ring and its valve-cap O-ring, 18 pieces in all, enough to service all three cylinders. The kit sold under 8.702-913.0 holds the valve O-rings only; this kit adds the six valve-cap O-rings so the caps can be resealed in the same job.

Fits pump models: EZ2536E, EZ2536S, EZ2542E, EZ2542S, EZ2545E, EZ2545S, EZ2555E, EZ3030G34, EZ3032S, EZ3035G, EZ3040G, EZ3040S, EZ3042S, EZ3045G, EZ4030G34, EZ4035G34, EZ4040G, EZ4040G34, EZ4040S34; TP2021C17, TP2021S17, TP2024C17, TP2024S17, TP2032C17, TP2032S17, TP2526J34, TP2530J34, TP2533J34; TX155G6, TX1505G8, TX1506G8, TX1508G6, TX1508G8, TX1508S34, TX1510G8, TX1510S34, TX1512S17, TX1812S17, TX1510A, TX1810E179, TX1812E179, HTX1810S, HTX1812S, HTX1813S, TC1507E345; TS2012SS, TS2016SS, TS2221SS; Interpump T1209, T1212, T1508, TT1508, TT1510, TT1511, TT1512, TT1513, W1208, W1210, W1507, WW1508, WW1509, WW1510, WW1511, WW1513, W186, W950EZE, W959, W959EZE, WW961EZG. Not for the TT-series pumps (TT9061, TT2028, TT1540 and others), which take a different valve kit. Confirm your pump model before ordering.

Pump inlet and discharge valves can be damaged by cavitation, and dirty or stuck valves cause low pressure and rough operation. Replacing all six valves in the pump head is the usual repair.

Cross-references: 8.702-913.0, 87029130.

This is an aftermarket replacement part from High PSI Products; part numbers are shown for cross-reference only.